Keeping yourself and everyone else safe on the road requires conscious effort on your part, especially if you are driving. You can actually minimize accidents by being the safe driver that you should be. One of the most important things to consider in this regard is to make sure you use your brakes properly. Here are braking tips that will make you a safer driver.
Be very light on the brake pedal
Stepping on your brake pedal in this manner will give you a lot of benefits. First, it will give you a space ahead of other drivers. Second, this will mean that you can prevent other drivers from hitting the back of your car. Last but not the least – this will give your car better gas mileage and will reduce the wear and tear on your brakes.
Remember that a sudden brake will make your vehicle lose its balance. This will send more weight to the front part which will also cause not just objects but also passengers to suddenly move forward. This can also cause skidding on your front wheels which can keep your vehicle off track. Hard braking may be done but only during emergency cases.
Brake only when necessary at higher speed roads
In case you are driving on the rod where faster speeds are allowed, there is lesser chance that other drivers will see your brake lights. Since traffic is moving faster, you are only given a lesser time to stop. You can slow down by letting off the gas pedal.
Release the gas pedal seconds before braking
This will help slow down your vehicle and will only require less pressure on the brake. Doing this will mean a smoother transition on the road and will also result to safe braking. Once you have seen any red light or you have seen a vehicle stopped around a block ahead, you should start releasing your gas pedal. When you have done this, you no longer need to push too hard on the brakes once the light turns green. This will keep you and others in front and behind you safer on the road.
You should brake early
Braking early will give other drivers a warning sign since they will be able to see your brake lights. This becomes a cycle which means that other drivers will also brake early to prevent them from getting too close to the back of your car. This prevents sudden stopping which is a common cause of accidents on the road.
Always pump your brakes
Pumping your brakes is a common practice for threshold braking. Even when you have practiced braking early, it will also be good to slightly pump your brakes several times since this will flash your brake lights which will then slow down the drivers behind you.
Keep a steady pressure when braking
One of the indications that you are a safe driver is that you practice good, steady pressure when braking. You have to remember that good braking techniques vary from one situation to another. When you are driving downhill, you will have to push harder and stop sooner. When you are moving on a tighter curve, there is a need to put more pressure on the brakes.
Leave plenty of room to swerve when braking behind a stopped vehicle
When you have seen a stopped vehicle in front of you, it will be good to live more room when braking to allow you to swerve. Make sure that you can still move quickly yet safely in case of these emergencies just so to prevent you from hitting the vehicle in front.
As you have seen earlier, good braking techniques will keep you and others safe on the road. If you want to learn braking techniques in the best way possible, you can attend an advance driving school in Malden.